Cellio – Keeping Temperature Monitoring Simple



What if you had the ability to see all the temperatures, all in one place, of all the things that mattered to you? What if the information was updated every hour – reliably? And what if, when the temperature got too cold and/or too hot, you got an email or text alert that it had gone out of range? Can you imagine the time it would save you from having to visit all the thermometers and inspect them visually, or the value of the accurate electronic logs to generate reports that you might need for compliance, or the peace of mind that you could have when you went home at night that something was looking out for everything that relied on temperature to remain viable? Cellio is just the simple solution if you answered “YES” to the above scenario and if you deal with these types of issues on a daily basis.




Simple IIoT Temperature Monitoring with Cellio


The most basic configuration of the Cellio Transceivers is connecting one temperature sensor to one Transceiver and using this configuration everywhere there is a point that needs to be measured/monitored/reported. Whether the need is to monitor things that are stationary or mobile, the combination of sensor, Transceiver, and Gateway allow you to configure almost any enterprise you want – and provide maximum flexibility if you ever need to reconfigure or relocate the sensors. With the extended distance provided by the 900MHz Transceivers using LoRa (1mile Line of Sight), a single Gateway can many times cover a complete facility, site, or campus.   From an installation perspective, the Gateway can be placed wherever is most convenient (or most central) to the Transceiver(s). The Transceivers can be mounted with industrial tape, screws, rivets, wire, cable ties, magnetic feet, etc. If the Gateway and Transceiver are intended to be kept mobile, they could be placed in a bag or box that could be placed wherever and whenever needed. Because the Transceiver operates on a 9VDC LiIon battery it is inherently and completely wireless (except of the connection to the sensor(s)). When the units are turned on, they are immediately on the same network and will begin transmitting without having to do any special configurations, settings, setup, etc. The data also shows up in the back-end immediately and starts to populate the dashboards and visible from desktop, tablet, smartphone, etc. If you are looking for simple, quick, and highly successful to get your enterprise up and running and monitoring temperatures, it is hard to image a system that is simpler, lower cost, or more powerful.




Conclusion – Perhaps we should call it Simplio!


The Cellio Wireless Network has been designed to be quick, affordable, and high quality. Cellio Wireless Transceivers allow the Cellio system and customers to quickly and easily expand existing systems with as many sensors and controllers as they like (with minimal incremental expense).  The data collected in the back-end data system can be easily and rapidly mapped and provided for view on PC’s, tablets, smartphones, etc. both via browser views as well as automatically generated native mobile app views. Sharing and modifying the dashboard views is quick and easy. All of this is available and in place today. There is a saying that you should “Inspect what you expect”.  Increasingly, people in charge of day-to-day operations only want to know if there is an issue that they need to attend to – and even then they only want the data that helps them decide if immediate attention is required. Cellio is uniquely designed to keep data to a minimum while maximizing utility in terms of serving the needs of the users. Cellio can be so simple we should probably consider renaming it to Simplio!